HydraUSB3 v1 is an open source developer kit for the WCH CH569 MCU to experiment with streaming / high-speed protocols like HSPI and SerDes through USB3.
For more details on HydraUSB3 v1 see following links:
HydraBus v1 is an open source multi-tool hardware for anyone interested in Learning/Developping/Debugging/Hacking/Penetration Testing for basic or advanced embedded hardware, its micro-controller is based on STM32F405 CortexM4F@168MHz.
HydraBus can be also used as Test Bench for hardware validation/test with help of embedded python script or native C/C++ firmware and it is a perfect tool for hardware pentesting for 1-wire, 2-wire and 3-wire, SWD & JTAG, SMARTCARD, NAND flash, Wiegand, LIN, CAN, Logic Analyzer, SPI, I2C, UART, ADC(0 to 3.3V), DAC (0 to 3.3V, triangle, noise), PWM (1Hz to 42MHz, Duty Cycle 0 to 100%), GPIO (In/Out/Open-Drain)
HydraBus is evolutive with the help of “Shield” hardware extensions
For more details on HydraBus v1 see following links:
HydraNFC Shield v2
HydraNFC Shield v2 is based on STMicroelectronics ST25R3916 NFC chipset which is today the most powerful and versatile NFC chipset available on the market.
HydraNFC Shield v2 shall be plugged on top of HydraBus v1 with a dedicated open source firmware (it can also be used with any MCU which have SPI).
HydraNFC Shield v2 is for anyone interested in Learning/Developping/Debugging/Hacking/Penetration Testing for basic or advanced NFC communications.
For more details on HydraNFC Shield v2 see following links: