HydraBus v1.0 Rev1.4 + HydraNFC Shield v2


1x HydraBus+Case
1x HydraNFC Shield v2.0 (includes 2x SMA cables + 1x HydraNFC v2 Antenna)

Out of stock



Package content:

  • 1x HydraBus+Case (Firmware flashed using latest firmware from https://github.com/hydrabus/hydrafw_hydranfc_shield_v2)
  • 1x HydraNFC Shield v2.0 (includes 2x SMA cables + 1x HydraNFC v2 Antenna)

HydraBus board v1.0 Rev1.4 features:

  • Open source multi-tool hardware (with open source firmware hydrafw) for anyone interested in Learning/Developping/Debugging/Hacking/Penetration Testing for basic or advanced embedded hardware
  • The MCU is one of the fastest Cortex M4F on the market and is more than 40X faster than an Arduino (STM32F405, 32bits@168MHz=210DMIPS vs Arduino Uno, 8bits@16MHz=5.2DMIPS)
  • HydraBus can be also used as Test Bench for hardware validation/test with help of embedded python script or native C/C++ firmware and it is a perfect tool for hardware pentesting for 1-wire, 2-wire and 3-wire, SWD & JTAG, SMARTCARD, NAND flash, Wiegand, LIN, CAN, Logic Analyzer, SPI, I2C, UART, ADC(0 to 3.3V), DAC (0 to 3.3V, triangle, noise), PWM (1Hz to 42MHz, Duty Cycle 0 to 100%), GPIO (In/Out/Open-Drain)
  • HydraBus is evolutive with the help of “Shield” hardware extensions like HydraNFC Shield, HydraFlash Shield, HydraLINCAN Shield…

HydraNFC Shield v2.0 R1.4 features:

  • NFC Reader/writer, NFC Card emulation, NFC Active and passive peer to peer
  • Support NFC-A / ISO14443A up to 848 kbit/s, NFC-B / ISO14443B up to 848 kbit/s, NFC-F / FeliCa up to 424 kbit/s, NFC-V / ISO15693 up to 53 kb/s, NFC-A / ISO14443A and NFC-F / FeliCa card emulation
  • 1.6W output power at 5V with Differential Antenna and Variable capacitors for NFC Automatic antenna tuning (AAT)
  • Low level mode to implement MIFARE Classic compliant or other custom protocols, Automatic gain control and squelch feature to maximize SNR
  • Measurement of antenna voltage amplitude and phase, RSSI, on-chip supply and regulated voltages

For more details on features supported in the dedicated firmware for HydraNFC Shield v2 see https://github.com/hydrabus/hydrafw_hydranfc_shield_v2

For more details see:

HydraBus v1.0 Specifications

HydraNFC Shield v2 Specifications

Additional information

Weight 0.250 kg
Dimensions 23 × 17 × 6 cm


There are no reviews yet.

Be the first to review “HydraBus v1.0 Rev1.4 + HydraNFC Shield v2”