HydraBus v1.0 Shield / Breakout board for ESP3212 (ESP32)

HydraESP32 HydraBus v1.0 Shield / Breakout board for ESP3212.
WARNING the ESP3212 is reported as deprecated in favor of ESP-32S (same pin-out as ESP-WROOM-32 but not CE compliant…).

This shield can be used with or without HydraBus board, you can even cut HydraBus specific right side (on the line) to have a tiny ESP3212 breakout board.

  • This shield shall be connected on bottom of HydraBus board
  • The HydraBus board is a small (60mm x 37mm) and low cost, multi-tool extensible board with STM32F405 Cortex M4F 32bits MCU @168MHz with a fully open source firmware hydrafw and full online documentation hydrafw wiki
  • The ESP32 is a low-power 32-bit 240 MHz dual core MCU Wi-Fi+BLE combo module that highly integrates TCP/IP network stacks, 12-bit ADC and HSPI/SDIO/UART/PWM/I2C/I2S interfaces. See Espressif ESP32 Overview

https://644db4de3505c40a0444-327723bce298e3ff5813fb42baeefbaa.ssl.cf1.rackcdn.com/4e93bef737327e3b68f37f42a366cd0a.png  https://644db4de3505c40a0444-327723bce298e3ff5813fb42baeefbaa.ssl.cf1.rackcdn.com/c7ad831e0e4fb0dd969c89bad9ea9816.png

Leave a Reply